| Description | Cupric bromide is a kind of inorganic compound obtained through the reaction between copper oxide and hydrobromic acid. It can be used in laser, generating pulse yellow and green light. The cupric bromide laser is an important technology used in dermatology for the treatment of pigmented lesion and vascular lesions. It can also be used in living radical polymerization and as an intensifier in photographic processing. It is also a brominating agent used in organic synthesis. In addition, it is a kind of highly efficient catalyst in the direct alkynylation of azoles. |
| Chemical Properties | Copper(II) bromide, CuBr2, [7789-45-9], MW 223.36, MP 498°C, d 4.77, is a black, deliquescent, monoclinic, crystalline material that obtains from warm aqueous solution. At temperatures below 29°C, the green tetrahydrate is produced. Copper(II) bromide is very soluble in water and soluble in alcohol and acetone. |
| Uses | Copper(II) bromide is used as a catalyst in organic reactions, as an intensifier in photography, and as a brominating agent. |
| Preparation | Copper(II) bromide is most easily prepared by neutralization of copper(II) oxide, carbonate, or hydroxide with hydrobromic acid. It can also be produced by oxidation of copper metal with bromine water or by reaction of bromine solutions in alcohol with copper powder. |
| References | Shen, Youqing, Shiping Zhu, and Robert Pelton. Macromolecules 34.10 (2001): 3182-3185.
Rothfleisch, Jeremy E., et al. Dermatologic clinics 20.1 (2002): 1- 18.
Huang, Jianhui, Simon JF Macdonald, and Joseph PA Harrity. Chemical Communications 4 (2009): 436-438.
Besselièvre, François, and Sandrine Piguel. Angewandte Chemie International Edition 48.50 (2009): 9553-9556. |
| Chemical Properties | Black crystal |
| Uses | Copper(II) bromide is used in photographic processing as an intensifier and as a brominating agent in organic synthesis. It is also used in the coupling of o-iodophenols and aryl acetylenes avoiding the use of palladium. It finds application in the preparation of NK1/NK2 receptor antagonists used in the regulation of tachykinin. |
| Uses | As intensifier in photography; as brominating agent in organic synthesis; as humidity indicator; as wood preservative; in solid-electrolyte battery; as stabilizer for acetylated polyformaldehyde. |
| Uses | Some reported applications of copper bromide are:
catalyst in cross coupling reactions.co-catalyst in Sonogashira coupling.Lewis acid in enantioselective addition of alkynes.reducing agent, when complexed by three molecules of pyridine initiators for the controlled polymerization of styrene, methyl acrylate and methyl methacrylate.
Reductive homocoupling of α-bromo- α- chlorocarboxylates to dimethyl α, α′ dichlorosuccinate derivatives in presence of CuBr/LiOCH3 in methanol has been reported.
|
| General Description | Odorless black solid. Sinks and mixes with water. |
| Air & Water Reactions | Deliquescent. Water soluble. |
| Reactivity Profile | Acidic inorganic salts, such as Cupric bromide, are generally soluble in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH’s of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible. Many of these compounds catalyze organic reactions. |
| Health Hazard | Inhalation of dust causes irritation of throat and lungs. Ingestion of large amounts causes violent vomiting and purging, intense pain, collapse, coma, convulsions, and paralysis. Contact with solutions causes eye irritation; contact with solid causes severe eye surface injury and skin irritation. |
| Fire Hazard | Special Hazards of Combustion Products: Irritating hydrogen bromide gas may form in fire. |
| Flammability and Explosibility | Notclassified |
| Purification Methods | Crystallise it twice by dissolving it in water (140mL/g), filtering to remove any Cu2Br2, and concentrating under vacuum at 30o until crystals appear. The cupric bromide is then allowed to crystallise by leaving the solution in a vacuum desiccator containing P2O5 [Hope et al. J Chem Soc 5226 1960, Glemser & Sauer in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol II p 1009 1965]. |
